Cooling precipitation and strengthening study in powder metallurgy superalloy U720LI

The excellent mechanical properties of powder metallurgy (P/M) superalloys strongly depend on the microstructure, such as grain size, and morphology a nd size distribution of the gamma ' precipitates. The microstructure, is, i n turn, determined by the heat treatment, viz., solution annealing, quenchi ng, and subsequent aging. To study the effect of the quenching process, two types of quenching methods were used to produce different quenched microst ructures in a UDIMET 720LI (U720LI) alloy. One was a continuous quenching m ethod, where samples were cooled along linearly controlled cooling profiles , each at a fixed cooling rate. This test studied the effect of cooling rat e on the size of cooling gamma ' precipitates (formed during quenching) and the consequent strengthening effect. The other test was the interrupted qu enching test, which allowed tracking the growth of cooling gamma ' precipit ates with decreasing temperature during quenching at a given cooling rate. The strengthening response at each interrupt temperature was also studied. Results from the continuous cooling tests showed that the relationship betw een the size of the cooling gamma ' precipitate and the cooling rate obeys a power law, with an exponential being about 0.35. The tensile strength was found to increase linearly with the cooling rate. Strengthening due to the subsequent aging treatment occurred regardless of cooling rates. The inter rupted cooling tests showed that gamma ' growth is a linear function of dec reasing temperature for a given cooling rate. A nonmonotonic degradation of tensile strength against interrupt temperature was discovered.