Sg. Park et al., Effect of time-varying axial magnetic field on photoresist ashing in an inductively coupled plasma, J VAC SCI B, 19(5), 2001, pp. 1841-1844
Time-varying axial magnetic field is added to an inductively coupled plasma
. Weak axial magnetic field of about 10-15 G can be obtained by a pair of H
elmholtz coils attached to the chamber. This scheme has been applied to etc
h SiO2 and silylated photoresist, where processing pressures are generally
below 7 Pa, and ions are major reaction species. In order to extend this co
ncept to other etching conditions, this method is applied to photoresist as
hing, where processing pressure is usually higher than 133 Pa, and downstre
am oxygen radicals are. important species. It is found that 60 Hz of the ac
current gives the maximum ash rate and that ash rate is increased from 6.1
to 7.0 mum/min, and uniformity is improved from 8% to 4.5% over an 8 in. w
afer. When aluminum baffle is placed between plasma source and reaction cha
mbers, the ash uniformity improves further to 2.0% over a 300 mm wafer. The
presence of axial magnetic field increases the plasma density and thus ash
rate, and better uniformity comes from redistribution of ions and radicals
during the off period in a periodic magnetic field. (C) 2001 American Vacu
um Society.