A synthetic aragonite-based bioceramic: influence of process parameters onporosity and compressive strength

We investigate the influence of process parameters such as weight fraction and particle size of pore-former, and isostatic pressure, on porosity and c ompressive strength of non-sintered porous calcium carbonate biomaterials c ompacted at high pressure in uniaxial or isostatic mode. Experiment design and results analysis are performed according to a two-level 2(k) factorial design method (FDM). Results indicate that only the weight fraction of pore -former (wt fpf) influences significantly the porosity and the compressive strength. The porosity P, is described by a linear function of wt fpf, and the compressive strength sigma (comp), by, an exponential one. For material s compacted tinder Uniaxial pressing: P (vol%) = 33.7 + 85.4 (wt fpf) and s igma (comp) (MPa) = 28.8 e(-9.2(wt) (fpf)) with 0.1 less than or equal to w t fpf less than or equal to 0.3. For materials compacted in isostatic mode: P (vol%) = 33.9 + 82.1 (wt fpf) and sigma (comp) (MPa) = 24.0 e(-7.0(wt) ( fpf)) with 0.15 less than or equal to wt fpf less than or equal to 0.35, Th e pore-former particle size has no significant influence on both properties . The increase in isostatic pressure provides slightly lower porosity and b etter compressive strength. For a fixed fraction of pore-former, isostatic pressing leads to a better compressive strength than uniaxial pressing. Thi s study indicates that, for a constant amount of pore former, the size of m acropores can be adjusted to reach optimal bone-ingrowth without change in compressive strength. (C) 2001 Elsevier Science Ltd. All rights reserved.