Citation: V. Waide et al., A CAD-CAM methodology to produce bone-remodelled composite femurs for preclinical investigations, P I MEC E H, 215(H5), 2001, pp. 459-469
Authors:
Monti, L
Cristofolini, L
Toni, A
Ceroni, RG
Citation: L. Monti et al., In vitro testing of the primary stability of the VerSys enhanced taper stem: a comparative study in intact and intraoperatively cracked femora, P I MEC E H, 215(H1), 2001, pp. 75-83
Authors:
Affatato, S
Vandelli, C
Bordini, B
Toni, A
Citation: S. Affatato et al., Fluid absorption study in ultra-high molecular weight polyethylene( UHMWPE) sterilized and unsterilized acetabular cups, P I MEC E H, 215(H1), 2001, pp. 107-111
Citation: M. Baleani et al., Temperature and ageing condition effects on the characterization of acrylic bone cement, P I MEC E H, 215(H1), 2001, pp. 113-118
Authors:
Viceconti, M
Monti, L
Muccini, R
Bernakiewicz, M
Toni, A
Citation: M. Viceconti et al., Even a thin layer of soft tissue may compromise the primary stability of cementless hip stems, CLIN BIOMEC, 16(9), 2001, pp. 765-775
Citation: M. Baleani et al., Initial stability of a cementless acetabular cup design: Experimental investigation on the effect of adding fins to the rim of the cup, ARTIF ORGAN, 25(8), 2001, pp. 664-669
Authors:
Affatato, S
Goldoni, M
Testoni, M
Toni, A
Citation: S. Affatato et al., Mixed oxides prosthetic ceramic ball heads. Part 3: effect of the ZrO2 fraction on the wear of ceramic on ceramic hip joint prostheses. A long-term in vitro wear study, BIOMATERIAL, 22(7), 2001, pp. 717-723
Authors:
Affatato, S
Fernandes, B
Tucci, A
Esposito, L
Toni, A
Citation: S. Affatato et al., Isolation and morphological characterisation of UHMWPE wear debris generated in vitro, BIOMATERIAL, 22(17), 2001, pp. 2325-2331
Authors:
Viceconti, M
Cristofolini, L
Baleani, M
Toni, A
Citation: M. Viceconti et al., Pre-clinical validation of a new partially cemented femoral prosthesis by synergetic use of numerical and experimental methods, J BIOMECHAN, 34(6), 2001, pp. 723-731
Citation: S. Affatato et A. Toni, Leg length measurement: a new method to assure the correct leg length in total hip arthroplasty, MED ENG PHY, 22(6), 2000, pp. 435-439
Authors:
Testoni, M
Baruffaldi, F
Mattioli, P
Sudanese, A
Terzi, S
Barbanti-Brodano, G
Toni, A
Citation: M. Testoni et al., Evaluation of radiolucency condition in total hip arthroplasty: a statistical comparison of the diagnostic capability of digitised image vs conventional X-ray film, EUR RADIOL, 10(4), 2000, pp. 601-608
Authors:
Ciapetti, G
Granchi, D
Stea, S
Cervellati, M
Pizzoferrato, A
Toni, A
Citation: G. Ciapetti et al., In vitro testing of ten bone cements after different time intervals from polymerization, J BIOM SC P, 11(5), 2000, pp. 481-493
Citation: M. Baleani et al., The effect of sandblasting treatment on endurance properties of titanium alloy hip prostheses, ARTIF ORGAN, 24(4), 2000, pp. 296-299
Authors:
Maher, SA
Prendergast, PJ
Reid, AJ
Waide, DV
Toni, A
Citation: Sa. Maher et al., Design and validation of a machine for reproducible precision insertion offemoral hip prostheses for preclinical testing, J BIOMECH E, 122(2), 2000, pp. 203-207
Authors:
Granchi, D
Ciapetti, G
Filippini, F
Stea, S
Cenni, E
Pizzoferrato, A
Toni, A
Citation: D. Granchi et al., In vitro cytokine production by mononuclear cells exposed to bone cement extracts, BIOMATERIAL, 21(17), 2000, pp. 1789-1795